How To Clean Dyson Ball Vacuum in 7 Simple Steps!

Reasons to Clean the Dyson Ball Vacuum Filter

Dyson Vacuum cleaning is necessary for many reasons. First, the Dyson vacuum cleaners, like other vacuum cleaners, often get clogged. A clogged filter filters less well, and this leads to increased dust emissions. A dirty Dyson vacuum cleaner might also make lots of noise and smell strange. Lastly, Dyson vacuum filter cleaning is necessary to increase the battery life.

How To Clean Dyson Ball Vacuum Cleaner

Here is a guide on how to clean Dyson Ball vacuum  cleaners:

Items you need for cleaning

The following ar the items you will need to clean the Dyson Ball vacuum cleaner

  • Soap or detergent
  • Microfiber washing cloth
  • Scissors
  • White Distilled Vinegar (Not compulsory)

Step By Step Guide on How To Clean Dyson Ball Vacuums

Step 1: Unplug the Vacuum Cleaner from the Power Source

Safety first, if you are going to clean the Dyson Ball vacuum cleaner, you will have to first unplug it from the power source.

Step 2: Emptying the Canister

The next step involves removing the dust canister as you usually do and emptying any dust or components held therein. You must ensure you shake the canister properly and hook out any dust to ensure it is dust-free. Most cordless model canisters can be detached using the trigger next to the vacuum handle.

Step 4: Wash the Canister Properly

After emptying the canister, now it is time to clean it. While at it, avoid submerging the canister in water or using cleaning chemicals or detergents to clean the canister.

Step 5: Detach The Filter

Now it is time to move to the next component of the Dyson vacuum cleaner- the canister. You must note that the filter is one of the most important parts of the vacuum cleaner and helps handle large dust particles. The filter is located on end, just next to the handle. You can refer to your manual if you are unsure how to detach your filter from the vacuum cleaner.

Step 6: Wash the Filter and Allow it to Dry Properly

After detaching the filter from the main vacuum cleaner, it is now time to clean it. You should first remove any dust clogged on the filter and gently tap it on a hard surface to ensure all the dust is separated. You should then wash the filter and rinse it in cold running water. To give the filter the final rinse, fill it with warm water, cover the opening with your hand and shake it. Tip out the water and repeat the procedure until the inside of the filter is sparkling clean. Ensure that the filter is completely dry before returning it to the vacuum cleaner.

Step 7: Check the Hose for any Blockages and clean it

If you have been having trouble using the Dyson vacuum cleaner, then it is possible that hose blockages might have caused the trouble. You can soak the vacuum hose for a few minutes in warm water combined with vinegar and leave it to completely dry.

Reassemble Everything

After everything has properly dried, it is now time to assemble all the parts and start enjoying clean and flawless vacuuming.

How Frequent Should I clean My Dyson ball vacuum cleaner?

For quality vacuuming, it is recommended you clean the vacuum once every month. However, this will al; so depend on the frequency of use.

You can watch the link in the link below to learn more on how to clean your Dyson vacuum cleaner;

 

 

 

 

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top