Sold Out
Sold Out
A user guide on why, where, and how to hang a Dyson vacuum
One of the most common questions about Dyson vacuum cleaners is why, where, and how to hang Dyson vacuums. If you are one of the people seeking answers to these questions, this article is for you. So without much ado, let us start by looking at why you need to hang the Dyson vacuum cleaner.
Why Do I need To Hang the Dyson vacuum cleaner?
The following are some of the reasons why you should consigner hanging the Dyson vacuum cleaner.
- Hanging prevents it from falling over
Because Dyson vacuum cleaners do come with a parking position, they can easily fall over, and this could result in vacuum damages that could impair their functionality. Hanging them over protects them from falling over and helps to prevent damages that can result from that.
- Saving Floor Room Space
Hanging the Dyson vacuum cleaner helps to create more space on the floor.
- Helps Room to Look Tidy
Hanging the Dyson vacuum cleaner makes the room appear neat. You could even hang the Dyson vacuum cleaner on the door closet.
Which is the Best Place to Hang the Dyson vacuum cleaner?
Before you start destroying your walls by drilling holes to create hanging spaces, it is ideal that you find the most suitable place that will befit your Dyson vacuum cleaner. It is recommended that you hang the Dyson vacuum cleaner near a socket where it can charge while hanging. It would be a great idea to avoid hanging it in sight where everyone sees it. Lastly, ensure you create the right height from the wall to hang your Dyson vacuum cleaner.
How to hang a Dyson vacuum cleaner:
What is needed
To create space and hang the Dyson vacuum cleaner, you will require a Dyson wall mount, A drill, screwdriver, measuring tape, level, charger, and wall plugs.
Step-by-step Guide on How to Hang the Dyson vacuum cleaner
You can follow the steps below to install the wall mount. Please note that the procedure applies to all Dyson stick vacuums, such as the Dyson V8, V10, V11, and V15.
Step 1:The charging cable should be attached to the back of the wall holder, while the cable end should be attached to the front of the wall holder.
Step 2:The next step entails screwing two holes, one above the other at the height of 1200 mm between the bottom hole and the floor. The distance between the top and bottom holes should be 127mm.
Step 3:The next procedure involves inserting the wall plugs into the holes you just screwed.
Step 4:You should hold the back of the wall bracket against the holes and use the two screws to properly fix them.
Step 6:Lastly, you should click the wall bracket front onto the mounting plate and plug the charger in the wall bracket.
You can click the link attached below to learn more about installing a Dyson wall mount and hanging your Dyson vacuum cleaner.
